product list
Element 2
+49 30 641 670 100
Element 1
info@microresist.de

Product selection

Filter by category, process, application etc.!

to the ancillaries
  • Element 13weqwf Contact Person
  • Element 22weqwf PDF download
  • Element 20weqwf Show Details
product category
process
end use application
Resist Alliance
CYCLOTENE™ 3000 series
Dielectric Materials
Element 23weqwf
Element 25weqwf
Dry Etch BCB Resin, spin-on, thermal cure
Cyclotene 3000 series

The CYCLOTENE 3000 series Advanced Electronic Resins derived from B-staged bisbenzocyclobutene (BCB) monomers are dry-etch grades of the CYCLOTENE family of products, and were developed for use as spin-on dielectric materials in microelectronic device fabrication. The CYCLOTENE Resins are low dielectric constant and low dielectric loss materials, and feature low moisture absorption, no out-gassing, low temperature cure and excellent planarization.

Product page

quotation request

Clear
CYCLOTENE™ 4000 series
Dielectric Materials
Element 23weqwf
Element 25weqwf
Photo Defined BCB Resin i-line and multi wavelength exposure, solvent developed
Cyclotene 4000 series

The CYCLOTENE 4000 Series advanced electronic resins are I-line-, G-line-, and broad band-sensitive photopolymers that have been developed for use as dielectrics in thin film microelectronics applications. These polymers are derived from B-staged bisbenzocyclobutene (BCB) chemistry and have final film properties that are similar to the dry etchable 3000 series.

Product page

quotation request

Clear
CYCLOTENE™ 6000 series
Dielectric Materials
Element 23weqwf
Element 25weqwf
Photo Defined BCB Resin i-line and multi wavelength exposure, aqueous developed
Cyclotene 6000

The CYCLOTENETM 6000 advanced electronic resins are I-line-, G-line-, and broadband-sensitive photopolymers that have been developed for use as dielectrics in thin film microelectronics applications. The polymers are based on B-staged aqueous developable bis-benzocyclobutene (ADBCB) chemistry, and have final film properties that are similar to legacy CYCLOTENETM 4000 and CYCLOTENETM 3000 series. CYCLOTENETM 6000 is TMAH developable, enabling high resolution and multilayer stack build dielectric material.

Product page

quotation request

Clear
INTERVIA ™ 8023 series
Dielectric Materials
Element 23weqwf
Element 25weqwf
Photo Defined Epoxy Resin, aqueous developed
Product page

quotation request

Clear
MX5000 series
Dry Film Photoresist
Element 23weqwf
Element 25weqwf
High Performance & High Resolution Multi-Purpose Polymer Film for Wafer Bumping, and Copper Pillar Applications
Features
  • Multipurpose, e.g. - Via (TSV) formation (DRIE), plating and protection, RDL etching
  • Filmthickness - 15-50 µm
  • Removable
  • Developer - Spray development, 0.75% K2CO3 (mr-D 4000/ 75)
Product page

quotation request

Clear
WBR2000 series
Dry Film Photoresist
Element 23weqwf
Element 25weqwf
High Performance & High Resolution Multi-Purpose Polymer Film for Wafer Bumping, and Copper Pillar Applications
MPF Product Features/ Application
  • Negative working, aqueous processable polymer film
  • Three layer package
  • Suitable for in-via and mushroom electroplating bumping applications.
  • Suitable for photo stenciling applications.
  • Strong heat resistance.
  • High resolution capability.
  • Wide processing latitude.
  • WBRTM series is compatible with the following typical surfaces:
    • Silicon
    • Silicon Nitride
    • Sputtered copper
    • Sputtered gold
    • PI/BCB with UBM
  • Polymer film thickness: 50, 75, 100 and 120 microns
  • Unexposed Color in Yellow Light: Light Green
  • Exposed Color in Yellow light: Dark Blue
Product page

quotation request

Clear

If necessary, please also use the general contact on our website – we will get back to you as soon as possible!

Produkte
0
Gesamt
€0,00
➥
Element 32
0

Negative Photoresists

Photoresists for UV (mask aligner, laser)/ DUV and e-beam lithography

  • Effective for broadband and i-line, Deep UV, e-beam exposure, or laser direct writing @ 405 nm
  • Lift-off resists with tunable pattern profile, high temperature stability up to 160 °C
  • Variety of viscosities for different film thicknesses in one spin-coating step
     
  • For pattern transfer: Physical vapour deposition (PVD) and single  layer lift-off, etch mask, mould for electroplating
  • For permanent applications: Polymeric waveguides
  • Use in microsystems technology, microelectronics, micro-optics  – manufacture of e.g. LEDs, ICs, MEMS, flat panel displays, fiber optics telecommunications devices
View all Negativ Photoresists
Element 23weqwf

Positive Photoresists

Positive Photoresists for UV lithography (mask aligner, laser, greyscale exposure) and e-beam lithography

  • Variety of viscosities for 0.1 µm – 60 µm film thickness in one spin-coating step
  • Effective for broadband, g-line, h-line or i-line exposure, laser direct writing at 350…450 nm and e-beam lithography
  • No post exposure bake
  • Easy removal
     
  • For pattern transfer: Etch mask, mould for electroplating, mould for UV moulding
  • Use in microsystems technology, microelectronics, micro-optics – manufacture of e.g. MEMS, LEDs, ICs, MOEMS, fiber optics telecommunications devices, flat panel displays
Element 23weqwf

Hybrid Polymers

micro resist technology offers a broad portfolio of UV-curable hybrid polymer products for micro-optical applications. Their excellent optical transparency and high thermal stability makes them perfectly suitable for the production of polymer-based optical components and waveguides. The main fields of application are micro lenses, diffractive optical elements (DOE), gratings, and single-mode or multi-mode waveguides.

OrmoComp®: DE 30 210 075 433; IR 1 091 982 ; TW 100030626; OrmoClear®: DE 30 210 075 434; IR 1 091 359 ; TW 100030628; OrmoStamp®: DE 30 210 075 435; IR 1 092 621 ; TW 100030629; OrmoPrime®: DE 30 210 075 436

Element 23weqwf

Nanoimprint Resists

Nanoimprint Lithography (NIL) is a straight forward, low cost, and high throughput capable technology for the fabrication of nanometer scaled patterns. Main application fields are photonics, next generation electronics, as well as bio- and sensor applications.

micro resist technology GmbH has provided tailor-made resist formulations for nanoimprint lithography (NIL) since 1999. The unique key features of our products are outstanding film forming and imprinting performance beside excellent pattern fidelity and plasma etch stability. Besides our highly innovative material developments in close contact to industrial needs, our strength is the ability to adjust our materials in film thickness as well as addressing certain needs of the specific use cases within the formulation. Our nanoimprint resists are mostly applied as an etch mask for pattern transfer into various substrates, like Si, SiO2, Al or sapphire.

Our portfolio covers materials for the classical thermal NIL (T-NIL), in which a thermoplastic polymer is used, as well as UV-NIL, in which a liquid formulation is photo crosslinked upon photo exposure. With our technological expertise and know-how we are able to find the right material for your process and applications. Please contact us for your technical support!

Element 23weqwf

Functional materials for inkjet-printing

Special designed functional materials from the product groups Hybrid Polymers, Photoresists, and Nanoimprint Polymers for the deposition and alternative patterning using inkjet printing process

  • Available in different viscosities (adjustable)
  • Suitable in commercial inkjet printing devices
  • Focused on high reliability of droplet generation
  • UV-curable formulations

 

  • Usable as a permanent material for optical application (e.g. lenses, wave guides, optical couplers, diffractive elements, …)
  • Packaging material in the micro electronic
  • Deposition / patterning on substrates with surface topography
  • Imprint material for nano-structuring with high dose accuracy
Element 23weqwf

Dry Films

Dry films are ready-to-use polymer films as laminate foil with a high accuracy of the film thickness and excellent adhesion behaviour on various substrates. They are very simple in handling, photo-structurable and both as cut sheets and as roll material available.

  • Available in different film thicknesses
  • UV-crosslinking as negative photoresist
  • Feasibility of high aspect ratios
  • Vertical sidewalls
  • Multi lamination possible – up to 6 layer  complex multi-layer designs
  • High chemical resilience

 

  • Application as permanent material for optical application (e.g. lenses, wave guides …), in micro fluidics
Element 23weqwf

Resist Alliance

micro resist technology is a single entry point for specialty chemicals used in micro and nano manufacturing in Europe. The portfolio of in-house products is complemented by the strategic sales of associated products that are manufactured by our international partners. Here we act as a high-service distributor and offer European medium-sized companies a wide range of complementary products from a single source, which can be used for both established and innovative production and manufacturing processes.

Kayaku Advanced Materials, Inc. (formerly MicroChem Corp.)

We offer photoresists and specialty chemicals for MEMS and microelectronic applications from our partner Kayaku Advanced Materials, with whom we have been working for more than 20 years.

DJ MicroLaminates, Inc.

We offer dry film resists for MEMS, microfluidics and packaging applications from our partner DJ MicroLaminates, with whom we have been cooperating for over two years.